Flamingo Slanted Champagne Wine Glasses Water Cup Set Crystal Light Luxury Retro Goblet Home Pink High-Value Bordeaux Wine Glass

Material: lead-free glass

Process: hand blown

Color: pink

Product Name: Beveled Wine Series

Style: light luxury

Note:

1. Bubbles:
There are no bubbles within 1 cm from the mouth of the product; bubbles on the cup body, and the length of the bubbles is less than 3mm (the bubbles are broken, and there are scratches, which are defective products, which are not included in the scope of currency). The bubble generation position is the center, and bubbles appear within a radius of 1cm , which belongs to the phenomenon of continuous bubbles, is designated as a defective product, and does not belong to a currency product. For the bubbles generated at the bottom of the cup stem and other positions except the cup body, the diameter of the bubbles is less than 3mm and no other bubbles can be produced within the radius of 0.5CM.
2. Pockmarks (stains)
The reason for this is the particles and magazines in the head material and tail material of the stove, and the production rate of currency products is less than 5%. It is required that within 1CM from the mouth, there should be no pitting, stains, etc. The horizontal visual distance of the cup body is 30cm, which is invisible to the naked eye. If it is visible, it is defective and does not fall within currency quality.
3. Streamline
The horizontal visual distance is 30cm and there is no obvious streamline trace. If there is, the streamline length does not exceed 3CM (goblet, mug, beer mug with a milliliter of less than 450ml), which is a normal currency product; if it exceeds the above two standards, It is a defective product and does not belong to the scope of currency quality.
4. Smoothness (product mold pattern)
The horizontal visual distance of the product is required to be invisible to the naked eye. If there is a slight mold pattern phenomenon, the height of the mold pattern phenomenon is required to be less than 10% of the total product height. If it exceeds, it is a defective product and does not belong to the quality range of currency products (mold pattern quality screening requirements Only applicable to artificial products, some machine products due to non-subjective reasons such as equipment technology, mold lines are normal phenomenon)